Suzuki GRAND VITARA XL-7 Owner's Manual page 67

1B-42 AIR CONDITIONING (OPTIONAL)
5) Using special tool, remove circlip.
Special tool
(A) : 09900-06107
6) Remove magnet clutch lead wire clamp screw, and remove
magnet clutch read wire ground terminal.
7) Remove magnet clutch with puller.
NOTE:
Be careful not to damage pulley when tapping magnet
clutch.
1. Puller
2. Compressor
8) Remove circlip using special tool.
Special tool
(A) : 09900-06107
9) Remove magnet clutch coil (1).
INSTALLATION
1) Install magnet clutch coil (2).
NOTE:
Protrusion on under side of magnet clutch coil (2) must
match hole in compressor assembly (3) to prevent move-
ment and correctly locate lead wire.
2) Using special tool, install new circlip (1) as shown.
Special tool
(A) : 09990-06107
3) Install clamp portion and ground terminal of lead wire.