Suzuki GRAND VITARA XL-7 Owner's Manual page 493

7F-8 DIFFERENTIAL (REAR)
b) Make mating marks (1) on drive bevel pinion and compan-
ion flange.
CAUTION:
Don't make mating mark on the coupling surface of the
flange.
c) Remove companion flange from drive bevel pinion. Use
special tool if it is hard to remove.
Special tool
(F) : 09913-65135
d) Remove drive bevel pinion with rear bearing, shim and
spacer from carrier.
If it is hard to remove, screw an used nut into drive bevel
pinion and hammer on that nut with a plastic hammer but
never directly on drive bevel pinion.
e) Remove drive bevel pinion rear bearing (2) by using bear-
ing puller (3) and press.
1. Drive bevel pinion