Show - Motorola RFS Series Reference Manual

2-38 Motorola RF Switch CLI Reference Guide

2.1.6 show


Common Commands
Displays the settings for the specified system component. There are a number of ways to
invoke the show command:
• When invoked without any arguments, it displays information about the current
context. If the current context contains instances, the show command (usually)
displays a list of these instances.
• When invoked with the display_parameter, it displays information about that
component.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
show <parameter>
Parameters
Display
Parameters
autoinstall
banner
commands
crypto
environment
history
interfaces
Description
Displays the autoinstall
configuration
Displays the message of the day
login banner
Displays command lists
Displays current encryption details
Displays environmental information
Displays the session command
history
Displays the current interface status
and configuration
Mode Example
Common page 2-43
Common page 2-44
Common page 2-45
Common page 2-46
Common page 2-50
Common page 2-50
Common page 2-51