Ap-Udp-Port - Motorola RFS Series Reference Manual

Wireless lan switches wing

Hide thumbs Also See for RFS Series:

Table of Contents

20.1.12 ap-udp-port

Wireless Configuration Commands

Configures the UDP port for layer 3 adoption of APs

You also need to configure the DHCP server providing the APs the same parameter.

Supported in the following platforms:

ap-udp-port <port>

RFSwitch(config-wireless)#ap-udp-port 20

RFSwitch(config-wireless)#

Sets the port number for layer 3 adoption of APs. <port> is

a value in the range 1-65535.

Wireless Instance

Rfs6000 Rfs7000