Client-Identifier - Motorola RFS Series Reference Manual

18.1.4 client-identifier


DHCP Config Commands
Assigns a name to the client-identifier
A client identifier is used to reserve an IP address for a DHCP client.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
client-identifier <identifier>
Parameters
client-identifier
<identifier>
Example
RFSwitch(config-dhcp)#client-identifier testid
RFSwitch(config-dhcp)#
Prepends a null character. Use
beginning (a single
\
DHCP Server Instance
at the
\\0
in the input is ignored)
18-9