Cli Overview; Configuration For Connecting To The Cli Using A Terminal Emulator - Motorola RFS Series Reference Manual

1-2 Motorola RF Switch CLI Reference Guide

1.1 CLI Overview

The CLI is used for configuring, monitoring, and maintaining the switch managed network.
The user interface allows you to execute commands (on the supported RFS6000, RFS4000,
and RFS7000 models) using either a serial console or a remote access method.
This chapter describes the basic features of the CLI. Topics covered include an introduction
to command modes, navigation and editing features, help features, and command history.
1.1.1 Configuration for connecting to the CLI using a terminal
emulator
Use the following settings to configure your terminal emulator for connecting to the
switch's CLI.
Bits Per Second
Data Bits
Parity
Stop Bit
Flow Control
When a CLI session is established, to access the switch, do as follows (user input is in
bold)
login as: cli
User Access Verification
Username:
Use the following credentials when logging to the CLI for the first time.
User Name
Password
When logging for the first time, you are prompted to change the password.
19200
8
None
1
None
admin
motorola