Setting The Display Of Media Residual; When Using 600 Cc Cartridge - MIMAKI JV150-130 Operation Manual

Setting the Display of Media Residual

Whether the screen displays the remaining amount of a
media is set.
the remaining amount of a media is
When the media
displayed in Remote.
remaining amount
(However, when a leaf media is used,
display is turned to
the length of the media to be printed is
"ON"
displayed.)
When the media
remaining amount the remaining amount of a media is not
display is turned to displayed in the Remote.
"OFF"
• The amount of a media that has been fed by the
printing and jog keys is reflected in the remaining
amount of a media.
• The length of a media (initial value of the
remaining amount) is entered when a roll media is
detected.( P.2-7)
• The setting configured here does not become
effective unless media detection is performed after
the setting has been complete.
1
Press the
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press
REMAIN", and press the
3
Press
4
Press the
5
Press the
to end the setting.
• When set "ON" the media remaining display, you
can print the list of current media remaining
amount and the date. (
(MENU) (twice)
to select "MEDIA
key.
to select ON/OFF.
key.
key several times
P.2-7)
Chapter 3 Mchine setting

When using 600 cc cartridge

Requisite for the 600 cc cartridge
Eco Case The 600 cc ink pack and the attached ink
chip are put in the eco case and used.
600 cc Ink Pack
This is referred to as "600 cc cartridge" in
*1
Ink Chip
this manual.
To calculate the remaining ink quantity,
input the weight of the eco case and the
600 cc cartridge into this machine. Use a
Scale scale for weight measuring. (To manage
the accurate remaining ink quantity,
prepare the scale that can weigh in one
gram unit.)
*1. Attached to the 600cc ink pack.
Mounting/removing 600 cc ink pack
Be sure to put the ink pack and the ink chip in the eco
case for setting the 600 cc cartridge on the ink station.
Precaution for using 600 cc cartridge
Be sure to put the ink pack and the ink chip in the eco
case for setting the 600 cc cartridge on the ink station.
• This machine cannot judge whether the 600 cc ink
pack is in the eco case or not.
When using the 600 cc cartridge, be sure to attach
the ink pack.
• Setting an eco case without ink chip on the
machine will break this machine. Be sure to attach
the ink chip to the eco case before use.
Registering weight of eco case
Register the eco case weight on this machine to calculate
the remaining ink quantity from the weight of the 600 cc
cartridge.
Register the weight of the eco case in the
following cases.
• For using the 600 cc cartridge for the first time
• When the case weight is changed by replacing the
eco case.
• The weight of each eco case slightly differs
respectively. To control accurate ink quantity, be
sure to register the weight of each eco case.
1
2
3
4
5
6
3-13