Setting The Display Of Media Residual; Setting A Language; Setting Time; Setting Unit (Temperature/ Length) - MIMAKI JV300-130 A Operation Manual

Setting the Display of Media Residual

Whether the screen displays the remaining amount of a
media is set.
the remaining amount of a media is
When the media
displayed in Remote.
remaining amount
(However, when a leaf media is used,
display is turned to
the length of the media to be printed is
"ON"
displayed.)
When the media
the remaining amount of a media is not
remaining amount
displayed in the Remote.
display is turned to
"OFF"
• The amount of a media that has been fed by the
printing and jog keys is reflected in the remaining
amount of a media.
• The length of a media (initial value of the
remaining amount) is entered when a roll media is
detected.( P.2-7)
• The setting configured here does not become
effective unless media detection is performed after
the setting has been complete.
Press the
1
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press
2
REMAIN", and press the
Press
3
Press the
4
Press the
5
to end the setting.
• When set "ON" the media remaining display, you
can print the list of current media remaining
amount and the date. (

Setting a LANGUAGE

You can change the displayed language.
Press the
1
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press
2
and press the
Press
3
press the
Press the
4
to end the setting.
(MENU) (twice)
to select "MEDIA
key.
to select ON/OFF.
key.
key several times
P.2-7)
(MENU) (twice)
to select "LANGUAGE",
key.
to select language, and
key.
key several times
Chapter 3 Machine setting

Setting Time

You can set time of your country (time difference).
Press the
1
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press
2
press the
Press
3
and press the
• Year/Month/Day/Time selecting:
by the [][] keys.
• Year/Month/Day/Time inputting:
by the [][] keys.
Press the
4
to end the setting.
• -20 hours to +4 hours can be set.

Setting Unit (Temperature/ Length)

Units used by this machine are set.
Press the
1
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press the
2
Press
3
"UNIT/LENGTH", and press the
key.
• MACHINE SETUP MENU will be displayed.
Press
4
press the
• Set value of tempture : °C / °F
• Set value of length
Press the
5
to end the setting.
(MENU) (twice)
to select "TIME", and
key.
to enter time,
key.
key several times
(MENU) (twice)
(>>) .
to select "UNIT/TEMP." or
to select a set value, and
key.
: mm / inch
key several times
1
2
3
4
5
6
3-13