D Setting Dtmf Transfer Speed - Icom ID-51A Advanced Manual
Vhf/uhf transceiver
Hide thumbs
Also See for ID-51A:
- Advanced instructions (369 pages) ,
- Basic instructions (104 pages) ,
- Brochure & specs (5 pages)
Table of Contents
Advertisement
Previous view
17
OTHER FUNCTIONS
■ Using the DTMF memory (Continued)
D Setting DTMF transfer speed
The DTMF transfer speed can be selected.
q Push [MENU]
to select the MENU list screen.
w Push D-pad(
) to select the root item ("DTMF/T-
CALL"), and then push D-pad(Ent).
D-pad
(Ent)
( )
e Push D-pad(
) to select "DTMF Speed," and then
push D-pad(Ent).
r Push D-pad(
) to select a desired transfer speed,
then push D-pad(Ent)
• 100ms: Transfer the DTMF tones at about 100 millisec-
onds per code.
5 characters per second.
• 200ms: Transfer the DTMF tones at about 200 millisec-
onds per code.
2.5 characters per second.
• 300ms: Transfer the DTMF tones at about 300 millisec-
onds per code.
1.6 characters per second.
• 500ms: Transfer the DTMF tones at about 500 millisec-
onds per code.
1 character per second.
t Push [MENU]
to exit the MENU screen.
Example: Set the DTMF transfer speed to 300 milli-
seconds.
When "100ms" is se-
lected, the DTMF trans-
fer speed is fast.
17-12
When "500ms" is se-
lected, the DTMF trans-
fer speed is slow.
Advertisement
Chapters
Table of Contents
