D Changing The Gps Memory/Alarm Channel; D Changing The Grid Locator; D Changing The Compass Direction - Icom ID-51A Advanced Manual

Previous view
10
GPS OPERATION
■ Checking GPS Position (Continued)

D Changing the GPS memory/alarm channel

While displaying the GPS position screen, GPS memo-
ry or GPS alarm location can be changed.
q While the MEM or ALM screen is displayed, push
[QUICK] .
w Push D-pad() to select "GPS Memory Select" or
"Alarm Select," and then push D-pad(Ent).
• The GPS Memory or Alarm Select screen appears.
e Push D-pad() to select the desired Memory or
Alarm location.

D Changing the Grid Locator

Grid Locator (GL) is a location compressed into a 6
character code, calculated by the longitude and the lati-
tude.
The locator is simply calculated by dividing the earth
surface into squares.
It is used to find the location of a radio station.

D Changing the Compass Direction

You can change the compass direction between Head-
ing Up, North Up and South Up.
q While the MY, RX1, MEM or ALM screen is dis-
played, push [QUICK]
w Push D-pad() to select "Compass Direction," and
then push D-pad(Ent).
D-pad
(Ent)
( )
e Push D-pad() to select the compass direction, and
then push D-pad(Ent).
• Heading Up: The compass always points to your
heading course direction.
• North Up: The top is always north.
• South Up: The top is always south.
Heading Up North Up
Field
PM74SO
Square
Subsquare
.
South Up
MEM screen
• The grid locator map of Japan
PN
PM
10-10
ALM screen
140°
14
04 24
13
03 23
QN
12
02 22
01 11 21
20
00 10 40°
09
08
07
06
QM
05
04
03
02
01