Icom ID-51A Advanced Manual page 312

Previous view
16
MENU SCREEN
■ DV Memory items (Continued)
* Appears when POSITION is set to "Approximate" or "Exact."
Repeater Group (01 to 30)
Repeater group name of up to 16 alphanumeric charac-
Group name
ters
The Skip setting can be turned ON or OFF in the QUICK MENU screen.
Repeater List
<DV Repeater>
TYPE DV Repeater
NAME Repeater name of up to 16 alphanumeric characters
SUB NAME Repeater sub name of up to 8 alphanumeric characters
CALL SIGN Repeater call sign
GW CALL SIGN Gateway call sign
GROUP Repeater group where the repeater is assigned
Select whether or not to use the repeater as an access repeater
USE(FROM)
(FROM) in the DR function.
FREQUENCY Operating frequency of the access repeater
DUP Duplex setting to use the access repeater
OFFSET FREQ Frequency offset to use the access repeater
POSITION Position data accuracy level ("None," "Approximate" or "Exact")
LATITUDE* Latitude position of the repeater
LONGITUDE* Longitude position of the repeater
Time difference between UTC (Universal Time Coordinated)
UTC OFFSET
and the local time
NOTE: When the repeater is used for a simplex communication, refer to the
list below to set the settings.
<DV Simplex>
TYPE DV Simplex
NAME Enter the desired name of up to 16 alphanumeric characters
SUB NAME Enter the desired sub name of up to 8 alphanumeric characters
GROUP Set the desired repeater group
Select whether or not to use the repeater as an access repeater
USE(FROM)
(FROM) in the DR function
FREQUENCY Frequency to operate simplex
POSITION Position data accuracy level ("None," "Approximate" or "Exact")
LATITUDE* Latitude position of the access point
LONGITUDE* Longitude position of the access point
Time difference between UTC (Universal Time Coordinated)
UTC OFFSET
and the local time
16-57