Icom ID-51A Advanced Manual page 268

Previous view
16
MENU SCREEN
■ Menu items and Default settings (Continued)
NOTE: The default settings shown below are for the USA version.
The default settings may differ, depending on your transceiver version.
In this item, set other options.
Function (Continued)
Heterodyne
Charging (Power ON)
In this item, set the Display options.
Display
Backlight
Backlight Timer
LCD Dimmer
LCD Contrast
Busy LED
RX Call Sign
RX Message
Reply Position Display
DV RX Backlight
TX Call Sign
Scroll Speed
Opening Message
Voltage (Power ON)
Display Unit
Latitude/Longitude
Altitude/Distance
Speed
Temperature
Barometric
Rainfall
Wind Speed
Display Language
System Language
1
* The default value may differ, depending on the transceiver version.
RANGE OR VALUE (Default is shown in bold)
Normal or Reverse
OFF or ON
RANGE OR VALUE (Default is shown in bold)
OFF, ON, Auto or Auto (DC IN:ON)
5sec or 10sec
Bright or Dark
1~8~16
OFF or ON
OFF, Auto or Auto (RX Hold)
OFF or Auto
OFF or ON
OFF or ON
OFF, Your Call Sign or My Call Sign
Slow or Fast
OFF or ON
OFF or ON
ddd ºmm.mm' or ddd ºmm'ss''
m or ft/ml *1
km/h, mph *1 or knots
ºC or ºF *1
hPa, mb, mmHg, inHg *1
mm or inch *1
m/s, mph *1 , knots
English or Japanese
English or Japanese
16-13
DESCRIPTIONS
Sets the 1st Local Oscillator frequency.
When the external DC power cable
is connected, this function enables
charging the battery even with the
power ON.
DESCRIPTIONS
Selects the transceiver backlight option.
Selects the backlight ON time period.
Selects the LCD backlight brightness level.
Sets the contrast level of the LCD.
Turns the TX/RX indicator ON or OFF.
Selects the call sign display option when
receiving a call.
Selects to display and scroll a received
message when receiving a call, or not.
Selects to display the caller's position
data when the data is included in the Auto
Reply signal, or not.
Turns the DV RX Backlight function ON or
OFF.
Selects whether or not to display My or
Your call sign while transmitting.
Selects the scrolling speed of the mes-
sage, call sign, or other text.
Selects whether or not to display the
opening message at power ON.
Selects whether or not to display the volt-
age of the battery or external DC power
source at power ON.
Selects position format to display the position.
Selects the units to display the distance
and altitude.
Selects the units to display the speed.
Selects the units to display the temperature.
Selects the units to display the barometric
pressure.
Selects the units to display the rainfall.
Selects the units to display the wind speed.
Selects the display language in the DR
function or Menu mode. When "English"
is selected in System Language, this set-
ting will disappear.
Selects English or Japanese as the sys-
tem language of the transceiver.