D Directly Inputting (Ur) - Icom ID-51A Advanced Manual

Previous view
8
D-STAR OPERATION <BASIC>
■ Setting "TO" (Destination) (Continued)

D Directly inputting (UR)

The destination station call sign can be directly input.
q Hold down for 1 second.
• The DR screen appears.
w Push D-pad( ) to select "TO," and then push D-

pad(Ent).
D-pad
(Ent)
( )
e Push D-pad( ) to select "Direct Input (UR)."

r Push D-pad(Ent) to enter the edit mode.
t Rotate [DIAL] to select a desired character.
(Example: J)
• A to Z, 0 to 9, / and a space can be selected.
• Rotate [DIAL] counterclockwise to enter a space.
• Push [CLR] to delete the selected character, or hold
down [CLR] to continuously erase the characters,
first to the right, and then to the left of the cursor.
y Push D-pad() to move the cursor to the second
digit.
u Repeat steps t and y to enter a call sign of up to 8
characters, including spaces.
(Example: First, J, then M, then 1, then Z, then L,
then K.)
i After entering, push D-pad(Ent) twice to save.
• "JM1ZLK" is displayed in "TO."
• After entering, you can correct the call sign in the DI-
RECT INPUT (UR) screen.
• The entered call sign remains on the DIRECT INPUT
(UR) screen, until entering a new call sign.
TIP: If the entered call sign is duplicated in "Your Call
Sign" memory, the name is displayed. (Only when the
name has been entered.)
[DIAL]
8-14
Example: Directly input the call sign "JM1ZLK."
Completed