Using The Emr Communication Function - Icom ID-51A Advanced Manual

Previous view
9
D-STAR OPERATION <ADVANCED>

■ Using the EMR communication function

The EMR (Enhanced Monitor Request) communication
function can be used in only the DV mode. Using the
EMR function, no call sign setting is necessary.
All transceivers that receive an EMR signal automati-
cally open their squelch to receive the signal.
When an EMR signal is received, the audio will be heard
at the preset level, even if the volume setting level is set
to the minimum level, or the digital call sign/digital code
squelch is used. (Default: OFF)
If the volume setting level is higher than the EMR set
level, the audio will be heard at the higher volume set-
ting level.
NOTE: The EMR function is automatically turned OFF
when the transceiver is turned OFF.
q Hold down for 1 second.
• The DR screen is displayed.
w Push D-pad( ) to select "FROM," and then push D-

pad(Ent).
D-pad
(Ent)
( )
e Push D-pad( ) to select "Repeater List," and then

push D-pad(Ent).
r Push D-pad( ) to select "11: Japan," and then push

D-pad(Ent).
t Push D-pad( ) to select "Hamacho," and then push

D-pad(Ent).
• "Hamacho" is displayed on "FROM".
y Push [MENU] .
u Push D-pad( ) to select the root item ("DV Set"),

and then push D-pad(Ent).
i Push D-pad( ) to select "EMR," and then push D-

pad(Ent).
o Push D-pad( ) to select "ON."

!0 Push [MENU] to exit the MENU screen.
• "EMR" appears.
!1 Push [PTT] to transmit.
• The TX/RX indicator lights red.
• "EMR" blinks on a station that receives the EMR signal.
And the audio (voice) will be heard at the specified level,
or the [VOL] control level, whichever is higher.
!2 Release [PTT] to receive.
!3 To cancel the EMR function, select "OFF" in step o,
as described above, or turn OFF the power.
Example: To transmit from the "Hamacho" repeater us-
ing the EMR function
Appears
9-8