Ci-V Information; D Ci-V Data Setting; D Ci-V Connection Example; D Data Format - Icom ID-51A Advanced Manual

Previous view
17
OTHER FUNCTIONS

■ CI-V information

D CI-V data setting

Set the ID-51A/E's address, data transferring speed
and transceive function. See page 16-78 to set the CI-V
setting using the MENU list screen.
Function > CI-V

D CI-V connection example

The transceiver can be connected through an optional
CT-17 -
ci v level converter
RS-232C port.
The Icom Communications Interface-V (CI-V) controls
the transceiver.
Up to 4 Icom CI-V transceivers or receivers can be con-
nected to the PC.
See the CT-17 instruction manual for details of remotely
controlling a transceivers and receivers.
* Use the cable illustrated to the right. No received audio is
heard when the supplied control cable, that comes with CT-
17, is used for the connection.

D Data format

The CI-V system can be operated using the following
data formats. Data formats differ, depending on the
command numbers. A data area or sub command is
added to some commands.
Controller to ID-51A/E
q w e
FE FE 86 E0
FE FE E0 86
q w e
ID-51A/E to controller
*The reply messages from the transceiver are the command "FB" (OK)
or "FA" (NG).
to a PC equipped with an
r t y
Cn Sc Data area
Cn Sc Data area
r* t y
ID-51A/E
¡Connections (ID-51A/E side)
3.5(d)mm
*No speaker is necessary for the CT-17 side.
u
FD
FD
u
17-22
Power source
9V∼15VDC
RS-232C
cable
CT-17
2-conductor 3.5(d) mm
plug must be used.
3-conductor 3.5(d) mm
plug must be used.
SP
SP GND
Less than 4.5(d)mm
I/O
personal
computer
GND
SP
I/O