Inserting The Microsd Card - Icom ID-51A Advanced Manual

Previous view
2
USING A microSD CARD

■ Inserting the microSD card

q Turn OFF the transceiver.
w Lift OFF the [micro SD] slot cover on the side panel.
e With the terminals facing the front, insert the card
into the slot until it locks in place, and makes a 'click'
sound.
DO NOT touch the terminals.
r Completely close the [micro SD] slot cover.
CAUTION:
After a microSD card is
inserted, completely close
the [micro SD] slot cover
as shown to the right.
NOTE:
• If you use a brand new microSD card, format it, by
doing the steps below.
• Formatting a card erases all its data. Before for-
matting any card with data on it, make a backup file
on your PC.
Close the cover,
leaving no gap.
Wrong
Correct
2-3
NEVER forcibly or in-
versely insert the card.
It will damage the card
and/or the slot.
[micro SD] slot
microSD card
Terminals facing
the front
Slot cover