Voice Recorder Function; D To Start Recording - Icom ID-51A Advanced Manual

Vhf/uhf transceiver
Hide thumbs Also See for ID-51A:
Table of Contents

Advertisement

Previous view
11
VOICE MEMORY FUNCTION

■ Voice Recorder function

The microphone audio, including audio from an exter-
nal microphone, can be recorded for your convenience.
• Depending on the microSD card capacity, you may continu-
ously record up to a maximum of about 37 hours. If the file
size exceeds 2 GB, a new file is automatically created in the
same folder, and the recorded voice audio is saved there.

D To start recording

q Push [MENU]
to enter the Menu screen.
w Push D-pad() to select the root item (Voice Memo),
and then push D-pad(Ent) to go to the next level.
D-pad
(Ent)
( )
( MENU > Voice Memo > Voice Recorder)
e Refer to the menu sequence shown directly above
and push D-pad() to select "Record," and then D-
pad(Ent).
• The VOICE RECORDER screen appears.
r Push [PTT] to start recording.
• "Recording" appears and the microphone audio record-
ing starts.
t Push [PTT] again to stop.
• The information screen appears.
y Push [MENU]
to exit the Menu screen.
[PTT]
NOTE: While recording a QSO,
a voice recording cannot be
made, and the screen shown
to the right appears. In that
case, push [MENU]
the Menu screen, and push
[QUICK]
. Push D-pad()
to select "Stop Recording" to
stop the QSO recording.
TIP: Even if the external microphone is connected,
the internal microphone's voice audio is recorded
when the transceiver's [PTT] is held.
To record the external microphone's voice audio, hold
down the external microphone's [PTT].
to exit
11-16
Shows the remain time
periods
Shows the microphone
gain level
Shows the recording time
Shows the microphone
input level

Advertisement

Table of Contents
loading

This manual is also suitable for:

Id-51e

Table of Contents