Auto Repeater - Icom ID-51A Advanced Manual

Previous view
16
MENU SCREEN
■ Function items (Continued)
Monitor
Function > Monitor
Select the [SQL] monitor function method.
• Push: Hold down [SQL] to monitor the frequency. Release to stop monitor-
ing.
• Hold: Push [SQL] momentarily to monitor the frequency and push momen-
tarily again to cancel it.
Dial Speed-UP
Function > Dial Speed-UP
Turn the dial speed acceleration ON or OFF.
The dial speed acceleration automatically speeds up the tuning dial speed
when you rapidly rotate [DIAL].
• OFF: Turns the function OFF.
• ON: Turns the function ON.

Auto Repeater

Function > Auto Repeater
This item appears only in the Korean and USA version transceivers
The auto repeater function automatically turns the duplex operation and tone
encoder* ON or OFF.
The offset and repeater tone* are not changed by the auto repeater function.
Reset these setting values, if necessary.
For Korean versions
• OFF: Turns the function OFF.
• ON: Turns ON the duplex operation and tone encoder*. (Default)
For USA version
• OFF: Turns the function OFF.
• ON (DUP): Turns ON the duplex operation only. (Default)
• ON (DUP, TONE): Turns ON the duplex operation and tone encoder*.
* The tone encoder will not be turned ON in the DV mode.
16-73
(Default: Push)
(Default: ON)