Entering The Repeater Group Name - Icom ID-51A Advanced Manual

Previous view
9
D-STAR OPERATION <ADVANCED>

■ Entering the repeater group name

q Push [MENU] .
w Push D-pad( ) to select the root item ("DV Memo-

ry"), and then push D-pad(Ent).
D-pad
(Ent)
( )
e Push D-pad( ) to select "Repeater List," and then

push D-pad(Ent).
r Push D-pad( ) to select the repeater group you want

to enter the name.
t Push [QUICK] .
y Push D-pad( ) to select "Edit Name," and then push

D-pad(Ent) to enter the group name edit mode.
u Rotate [DIAL] to select a desired character.
• Selectable characters are upper case letters, lower case
letters, numbers or symbols.
• The selected character blinks.
• Push D-pad() to move the cursor forward or backward.
• While selecting a character, push [QUICK]
the character to an upper case or lower case letter.
• While selecting a digit, push [QUICK]
input mode selection window.
• A space can be entered in any input mode.
• Rotate [DIAL] counterclockwise to enter a space.
• Push [CLR] to delete the selected character, or hold
down [CLR] to continuously delete the characters,
first to the right, and then to the left of the cursor.
• See page 2-8 for entry details.
i Push D-pad() to move the cursor to the second
digit.
o Repeat steps u and i to enter a name of up to 16
characters, including spaces.
!0 After entering, push D-pad(Ent) two times.
to change
to open the
9-41
Group name
edit mode
Shows the currently se-
lected character type
Character type
selection screen
Example:
"China" is entered.