D Using The Preloaded Repeater List - Icom ID-51A Advanced Manual

Previous view
8
D-STAR OPERATION <BASIC>
■ Setting "FROM" (Access repeater) (Continued)

D Using the preloaded Repeater List

For easy operation, a Repeater List is preloaded into
your transceiver.
Example: Select the "Hirano" repeater in Japan from
the list.
q Hold down for 1 second.
• The DR screen appears.
w Push D-pad( ) to select "FROM," and then push D-

pad(Ent).
D-pad
(Ent)
( )
e Push D-pad( ) to select "Repeater List," and then

push D-pad(Ent).
r Push D-pad( ) to select the repeater group where

your access repeater is listed, and then push D-
pad(Ent).
• Example: "11: Japan"
• The Repeater List, described in this manual, may differ
from your transceiver's list.
t Push D-pad( ) to select your access repeater, and

then push D-pad(Ent).
• Example: "Hirano"
y If the selected repeater's name is displayed in
"FROM" on the DR screen, the access repeater set-
ting is completed.
IMPORTANT!
The Repeater List described in this manual may differ
from your transceiver's preloaded contents.
When you select an FM repeater:
You can select an FM re-
peater if it is in your trans-
ceiver's Repeater List.
The "TO" setting is not nec-
essary for an FM repeater,
so "---" is displayed in "TO."
(Sample)
When selecting an
FM repeater.
8-3
"FROM" is selected.
Repeater area
Repeater call sign
Completed
How to change the repeat-
er group:
While in the DR screen,
push [QUICK] to open
the Quick menu. Then se-
lect "Group Select."