Icom ID-51A Advanced Manual page 157

Previous view
10
GPS OPERATION
■ GPS memory operation (Continued)
2. Entering the GPS Memory name
u Push D-pad() to select "NAME," and then push D-
pad(Ent).
D-pad
(Ent)
( )
i Rotate [DIAL] to select the first character.
• Selectable input characters are upper case letters, lower
case letters, numbers or symbols.
• The selected character blinks.
• Push D-pad() to move the cursor forward or backward.
• While selecting a character, push [QUICK]
the character to an upper case or lower case letter.
• While selecting a digit, push [QUICK]
input mode selection window.
• A space can be entered in any input mode.
• Rotate [DIAL] counterclockwise to enter a space.
• Push [CLR] to delete the selected character, or hold
down [CLR] to continuously delete the characters,
first to the right, and then to the left of the cursor.
• See page 2-8 for entry details.
o Push D-pad() to move the cursor to the second
digit.
!0 Repeat steps i and o to enter a GPS Memory
name of up to 16 characters, including spaces.
!1 After entering, push D-pad(Ent).
to change
to open the
10-14
Character
type selection
screen
(Example)
When entering
"HOME"
☞ Continued on the next page