Icom ID-51A Advanced Manual page 262

Previous view
16
MENU SCREEN
■ Menu items and Default settings (Continued)
NOTE: The default settings shown below are for the USA version.
The default settings may differ, depending on your transceiver version.
In this item, set the GPS options.
GPS
GPS Set
GPS Select
Power Save (Internal GPS)
Manual Position
GPS Indicator
GPS Out (To DATA Jack)
GPS Information
GPS Position
GPS Memory
GPS Alarm
Alarm Select
Alarm Area (Group)
Alarm Area (RX/Memory)
GPS Logger
GPS Logger*
Record Interval
Record sentence
<<GPS Logger Only>>
* Be sure to insert the microSD card into the transceiver before selecting these items.
RANGE OR VALUE (Default is shown in bold)
OFF, Internal GPS, External GPS
or Manual
OFF, 1min, 2min, 4min, 8min or Auto
OFF or ON
OFF or ON
OFF, RX, Group or Memory
0'05"/0.08'~0'15"/0.25'~
59'59"/59.99'
Limited, Extended or Both
OFF or ON
1sec, 5sec, 10sec, 30sec or 60sec
□ ✔ RMC/□ ✔ GGA/□ ✔ GLL/□ ✔ VTG
16-7
DESCRIPTIONS
Selects the GPS receiver that the trans-
ceiver receives its position data from.
Selects the internal GPS receiver power
save function.
Manually enters your current position.
Turns the GPS indicator ON or OFF.
Turns the output of GPS information from
the internal GPS receiver to the [DATA]
jack ON or OFF.
Displays the received GPS information.
Displays your position, RX station, GPS
memory and Alarm positions.
Shows the GPS memory contents.
Selects the target for the GPS alarm func-
tion.
Enters the GPS alarm active range.
Selects the GPS alarm active range.
Turns the GPS logger function ON or OFF,
to store your route as you move.
Selects the GPS Logger function record
interval.
Selects the GPS Logger function record
sentences.
Turns ON the GPS logger function with
the transceiver in the Sleep mode.
☞ Continued on the next page