Speech Items - Icom ID-51A Advanced Manual

Previous view
16
MENU SCREEN

■ SPEECH items

RX Call Sign SPEECH
SPEECH > RX Call Sign SPEECH
Turn the RX call sign speech function ON or OFF for calls received in the DV
mode.
• OFF: No announcement is made even when a call is received.
• ON (Kerchunk): The caller station's call sign is announced only when it
makes a short transmission.
• ON (All): The caller station's call sign is always announced.
NOTE: When a call is received during an announcement, the received au-
dio is heard after cancelling the announcement.
RX>CS SPEECH
SPEECH > RX>CS SPEECH
Turn the RX>CS Speech function ON or OFF.
The RX>CS Speech function enables the transceiver to announce the sta-
tion call sign that is selected from a Received Call Record by pushing
and then rotating [DIAL]. (p. 9-17)
• OFF: The station call sign is not announced.
• ON: The station call sign is announced.
NOTE:
• When a call is received during an announcement, the received audio will
be muted, and no audio is recorded onto the microSD card.
• If the call sign is announced while recording, the recorded contents are
silent during the announcement.
DIAL SPEECH
SPEECH > DIAL SPEECH
Turn the Dial Speech function ON or OFF.
The Dial Speech function enables the transceiver to announce the frequency
or repeater call sign that is selected by rotating [DIAL].
• OFF: The Dial Speech function is OFF.
• ON: The frequency or repeater call sign is announced, 1 second after
[DIAL] selection.
- In the VFO, Memory and Call channel modes, the frequency is an-
nounced.
- In the DR function, the repeater call sign is announced. If Simplex is
selected, the frequency is announced.
NOTE: When a call is received during an announcement, the received au-
dio is heard after cancelling the announcement.
16-66
(Default: ON (Kerchunk))
(Default: ON)
(Default: OFF)