D To Transmit The Recorded Voice Audio - Icom ID-51A Advanced Manual

Previous view
17
OTHER FUNCTIONS
■ Voice TX function (Continued)

D To transmit the recorded voice audio

q Push [MENU] .
w Push D-pad( ) to select the root item ("Voice TX"),

and then push D-pad(Ent).
D-pad
(Ent)
( )
e Push D-pad( ) to select "<<Single TX>>" or "<<Re-

peat TX>>," and then push D-pad(Ent).
<<Single TX>>
The transceiver transmits the recorded voice audio
once.
<<Repeat TX>>
The transceiver repeatedly transmits the recorded
voice audio for up to 10 minutes at the interval speci-
fied in "Repeat Time."
• The recorded voice audio is repeatedly transmitted for up
to 10 minutes. Even if 10 minutes pass while transmitting,
the voice audio is completely transmitted.
• One of the following will cancel the transmission.
- Push [PTT].
- Turn OFF the power, then turn it ON again.
- Push any key (except for [POWER]).
- Rotate [DIAL].
• Once the Repeat TX is sent, the transceiver pauses until
the end of the "Repeat Time," then transmits again. After
the second transmission, the Repeat TX continues paus-
ing, if receiving a signal, even if the Busy Lockout is ON.
But if the squelch is manually opened in the FM mode,
the voice audio is repeatedly transmitted, according to
the repeat time setting.
r Push [MENU] to exit the MENU screen.
The Voice TX can be selected on the QUICK Menu
screen.
➥ Push [QUICK] , and then push D-pad(
lect "Voice TX."
• Voice TX Waiting screen for <<Repeat TX>>
) to se-

17-3
Blinks while
transmitting.