Icom ID-51A Advanced Manual page 264

Previous view
16
MENU SCREEN
■ Menu items and Default settings (Continued)
NOTE: The default settings shown below are for the USA version.
The default settings may differ, depending on your transceiver version.
In this item, set and display the call signs used in the DV mode.
Call Sign
UR: CQCQCQ, R1: --------, R2: --------, MY: --------
This item displays the received call history in the DV mode.
RX History
RX01:
This item stores Your Call signs or repeater information to use in the DV mode.
DV Memory
Your Call Sign
Repeater List*
*
See page 9-47 for details of the preloaded data.
NOTE: The Repeater List described on this manual may differ from your preloaded list.
My Station This item stores your own call sign to use in the DV mode.
My Call Sign
TX Message
Blank
01: ~ 30:
RANGE OR VALUE (Default is shown in bold)
1: ~ 6:
1: ~ 5: or OFF
Displays the operating call signs.
Sets the operating call signs according to the
type of call you want to make.
Displays the calls your transceiver received.
Stores station call signs.
Adds or edits a call sign.
Stores repeater information.
Adds or edits a repeater information.
Stores your own call signs.
Select or edit a call sign to use in the DV mode.
Stores TX Messages.
Select or edit TX Message to use in the DV
mode.
16-9
DESCRIPTIONS
DESCRIPTIONS