Display Items - Icom ID-51A Advanced Manual

Previous view
16
MENU SCREEN

■ Display items

Backlight
Display > Backlight
Select the transceiver backlight option.
• OFF: The backlight does not light.
• ON: The backlight lights continuously.
• Auto: The backlight lights when an operation is performed, and
goes out after the time period set in the Backlight Timer.
• Auto (DC IN:ON): The backlight lights when an operation is performed, and
goes out after the time period set in the Backlight Timer,
but lights continuously while operating with an external
DC power source.
NOTE: While in the exclusive GPS logger mode, the transceiver uses the
"Auto" setting even if "ON" or "Auto (DC IN:ON)" is selected.
When [PWR] is pushed, the backlight lights for the set period of time (set in
"Backlight Timer") when "Auto" or "Auto (DC-IN:ON)" is selected.
Backlight Timer
Display > Backlight Timer
Select the backlight lighting time period to between 5 and 10 seconds.
Depending on the Backlight option, the backlight lights for this set period,
and then automatically goes out.
LCD Dimmer
Display > LCD Dimmer
Select the LCD backlight brightness level between Bright and Dark.
• Bright: The LCD backlight brightness level is bright.
• Dark: The LCD backlight brightness level is dim.
LCD Contrast
Display > LCD Contrast
Set the contrast of the LCD.
Set the level between 1, the lowest contrast, and 16, the highest.
16-80
(Default: Auto (DC IN:ON))
(Default: 5sec)
(Default: Bright)
(Default: 8)