Changing The Recording Mode - Icom ID-51A Advanced Manual

Previous view
11
VOICE MEMORY FUNCTION

■ Changing the recording mode

The recording audio can be selected in the "REC Mode"
item on the Menu screen.
TIP: The default setting is "TX&RX" (Both transmit
and receive signals are recorded).
q Push [MENU] to enter the Menu screen.
w Push D-pad() to select the root item (Voice Memo),
and then push D-pad(Ent) to go to the next level.
D-pad
(Ent)
( )
( MENU > Voice Memo > QSO Recorder >
Recorder Set > REC Mode)
e Refer to the menu sequence shown directly above
and push D-pad() to select, and then D-pad(Ent)
to enter, one or more times until the last screen is
displayed.
r Push D-pad() to select "RX Only," and then push
D-pad(Ent) to save.
t Push [MENU] to set and exit the Menu screen.
11-10