Entering The Your (Destination) Call Sign - Icom ID-51A Advanced Manual

Previous view
9
D-STAR OPERATION <ADVANCED>

■ Entering the Your (destination) call sign

A Your (destination) call sign can be manually entered.
The Your (destination) call sign is set to "TO," you can
make a call to a station, even if you don't know where
the station is currently located.
Up to 200 Your call signs can be entered.
q Push [MENU] .
w Push D-pad( ) to select the root item ("DV Memo-

ry"), and then push D-pad(Ent).
D-pad
(Ent)
( )
e Push D-pad( ) to select "Your Call Sign," and then

push D-pad(Ent).
r Push [QUICK] .
t Push D-pad( ) to select "Add," and then push D-

pad(Ent) to enter the edit mode.
y Push D-pad( ) to select "NAME," and then push D-

pad(Ent).
u Rotate [DIAL] to select a desired character.
(For example: T)
• Selectable characters are upper case letters, lower case
letters, numbers or symbols.
• The selected character blinks.
• Push D-pad() to move the cursor forward or backward.
• While selecting a character, push [QUICK]
the character to an upper case or lower case letter.
• While selecting a digit, push [QUICK]
input mode selection window.
• A space can be entered in any input mode.
• Rotate [DIAL] counterclockwise to enter a space.
• Push [CLR] to delete the selected character, or hold
down [CLR] to continuously delete the characters,
first to the right, and then to the left of the cursor.
• See page 2-8 for entry details.
i Push D-pad() to move the cursor to the second
digit.
o Repeat steps u and i to enter a name of up to 16
characters, including spaces.
(For example: First, T, then O, then M.)
!0 After entering, push D-pad(Ent) two times.
Example: Enter "TOM/JM1ZLK" to the Your Call Sign
to change
to open the
9-43
memory.
Select
( Select when you edit
"TOM" is entered.
☞ Continued on the next page
the Your call sign.)