Icom ID-51A Advanced Manual page 121

Previous view
9
D-STAR OPERATION <ADVANCED>
■ Entering information into Repeater List
D New repeater entry (Continued)
3. Entering the repeater name
!0 Push D-pad( ) to select "NAME," and then push D-

pad(Ent) to enter the repeater name edit mode.
D-pad
(Ent)
( )
!1 Rotate [DIAL] to select a desired character.
• Selectable characters are upper case letters, lower case
letters, numbers or symbols.
• The selected character blinks.
• Push D-pad() to move the cursor forward or backward.
• While selecting a character, push [QUICK]
the character to an upper case or lower case letter.
• While selecting a digit, push [QUICK]
input mode selection window.
• A space can be entered in any input mode.
• Rotate [DIAL] counterclockwise to enter a space.
• Push [CLR] to delete the selected character, or hold
down [CLR] to continuously delete the characters,
first to the right, and then to the left of the cursor.
• See page 2-8 for entry details.
!2 Push D-pad() to move the cursor to the second
digit.
!3 Repeat steps !1 and !2 to enter a name of up to 16
characters, including spaces.
!4 After entering the name, push D-pad(Ent).
to change
to open the
9-26
Shows the currently se-
lected character type
Character type
selection screen
Example:
"East Tokyo" is
entered.
☞ Continued on the next page.