Icom ID-51A Advanced Manual page 270

Previous view
16
MENU SCREEN
■ Menu items and Default settings (Continued)
NOTE: The default settings shown below are for the USA version.
The default settings may differ, depending on your transceiver version.
In this item, set the microSD card options.
SD Card *1
Load Setting
Save Setting
Import/Export
SD Card Info
Format
Unmount
Others
Information
Clone
Reset
* 1 Be sure to insert the microSD card into the transceiver before selecting these items.
* 2 The default value may differ, depending on the transceiver version.
RANGE OR VALUE (Default is shown in bold)
File selection ALL, Except My Station,
Repeater List Only
<<New File>>
File selection
Import Your Call Sign, Repeater List,
GPS memory
Your Call Sign, Repeater List,
Export
GPS memory
CSV format
Separator/ Sep [,] Dec [.]
Decimal or Sep [;] Dec [,]
Date
yyyy/mm/dd, mm/dd/yyyy
or dd/mm/yyyy
Voltage
Version
Clone Mode
Clone Master Mode
Partial Reset
All Reset
Loads the settings file to the transceiver.
Saves the settings as a new file.
Saves the settings in a selected file.
Imports data to the transceiver.
Exports data from the transceiver.
Selects the separator and the decimal charac-
, Sep [;] Dec [.]
* 2
ter that are used in the CSV format data.
Selects the date format.
2
*
Displays the free space and remaining re-
cording time of the card.
Formats the card.
Electronically unmounts the card.
Shows the battery voltage.
Shows the transceiver's firmware version
number.
Reads or writes the CS-51PLUS2 data
from or to the PC, and/or to receive data
from a Master transceiver.
Writes your ID-51A/E (Master) data to an-
other ID-51A/E (Sub).
Returns all settings to their defaults, with-
out clearing the memory contents, call
sign memories or Repeater List.
Clears all entries and memories, and re-
turn all settings to their defaults.
16-15
DESCRIPTIONS
DESCRIPTIONS