Icom ID-51A Advanced Manual page 239

Previous view
14
PRIORITY WATCH
■ VFO scan and a priority channel (Continued)
4. During the Priority watch
Checks the selected priority channel every 5 seconds,
while VFO scanning
5. When a signal is received.
• When "ON" is selected.
When a signal is received on the priority channel,
the channel is automatically selected.
The "PRIO" icon blinks.
* The scan pause timer and resume settings are the
same as for a normal scan.
• When "Bell" is selected.
When a signal is received on the priority channel,
a beep sounds and the "
scan resumes.
" icon blinks. The VFO
14-9
Example: Checks M-CH "490" while VFO scanning
Appears
Blinks
Example: Checks Bank-CH "D06" while VFO scanning
Appears
Blinks
Example: Checks Call-CH "C3" while VFO scanning
Appears
Blinks
Example: For a Memory channel
Automatically selects the priority channel.
Remains the VFO mode.
Appears
Checks the Memory chan-
nel every 5 seconds.
Appears
Checks the Bank channel
every 5 seconds.
Appears
Checks the Call channel
every 5 seconds.
Blinks
Blinks
Blinks
Blinks