I Auto Repeater (Usa Version Only) - Icom IC-2820H Instruction Manual

4
REPEATER OPERATION
I Auto repeater
The U.S.A. and Korean versions automatically use standard
repeater settings
(duplex ON/OFF, duplex direction, tone encoder
when the operating frequency falls within or outside
ON/OFF)
of the general repeater output frequency range. The offset
and repeater tone frequencies are not changed by the auto
repeater function, reset these frequencies, if necessary.
D Frequency range and offset direction
• U.S.A. version
FREQUENCY RANGE
145.200–145.495 MHz
146.610–146.995 MHz
147.000–147.395 MHz
442.000–444.995 MHz
447.000–449.995 MHz
• Korean version
FREQUENCY RANGE
439.000–440.000 MHz
35
SHIFT DIRECTION
"DUP–" appears
"DUP+" appears
"DUP+" appears
"DUP–" appears
SHIFT DIRECTION
"DUP–" appears
U.S.A./KOREAN versions only
q Push [F•
] to display the function guide.
wPush [MENU](V/MHz•SCAN)
screen.
e Rotate [DIAL] to select "SET MODE" then push
[MAIN•BAND].
rRotate [DIAL] to select "AUTO REPEATER" then push
[MAIN•BAND].
t Rotate [DIAL] to select the auto repeater setting.
[U.S.A. version]:
• "ON1" : Activates duplex only. (default)
• "ON2" : Activates duplex and tone.
• "OFF" : Auto repeater function is turned OFF.
[Korean version]:
• "ON" : Activates duplex and tone. (default)
• "OFF" : Auto repeater function is turned OFF.
y Push [BACK](V/MHz•SCAN)
from set mode.
to enter MENU
(Right band's)
twice to exit
(Right band's)
Auto Repeater set: ON1
(USA version)