D Turning On The Auto Repeater Function (U.s.a. And Korea Versions Only) - Icom IC-7100 Instruction Manual

Previous view
4
RECEIVE AND TRANSMIT
Repeater operation (Continued)
D Turning ON the Auto Repeater function
(U.S.A. and Korea versions only)
When the operating frequency falls within the repeater
output frequency range, the Auto Repeater function au-
tomatically sets the repeater settings (duplex ON/OFF,
duplex direction, tone encoder ON/OFF).
q
Push (C) to enter the Set mode.
SET
w
Touch the "Auto Repeater" item of the "Function" Set
mode.
Function > SPLIT/DUP > Auto Repeater
• If the specifi ed item is not displayed, touch [Y] or [Z](D)
one or more times to select the page.
e
Touch the desired option to turn ON the Auto Re-
peater function.
U.S.A. version:
• "ON–1" Activates duplex only.
• "ON–2" Activates duplex and tone.
• "OFF" Auto repeater function is turned OFF.
Korea version:
• "ON" Activates duplex and tone.
• "OFF" Auto repeater function is turned OFF.
r
Push (C) to exit the Set mode.
SET
L eft D isplay R ight
C enter
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch panel)
4-29
Push SET
Touch "Function"
Touch
"SPLIT/DUP"
Touch "Auto Re-
peater"
Touch the option
Example: ON