Auto Repeater Function; D Frequency Range And Offset Direction - Icom IC-92A Instruction Manual

6
REPEATER AND DUPLEX OPERATIONS

■ Auto repeater function

The U.S.A. and Korean versions automatically use standard
repeater settings
(duplex ON/OFF, duplex direction, tone encoder
when the operating frequency falls within or outside
ON/OFF)
of the general repeater output frequency range. The offset
and repeater tone frequencies are not changed by the auto
repeater function, reset these frequencies, if necessary.

D Frequency range and offset direction

• U.S.A. version
FREQUENCY RANGE
145.200–145.495 MHz
146.610–146.995 MHz
147.000–147.395 MHz
442.000–444.995 MHz
447.000–449.995 MHz
• Korean version
FREQUENCY RANGE
439.000–440.000 MHz
32
SHIFT DIRECTION
"–DUP" appears
"+DUP" appears
"+DUP" appears
"–DUP" appears
SHIFT DIRECTION
"–DUP" appears
U.S.A./KOREAN versions only
q Enter "AUTO RPT" in set mode. (p. 89)
➪
❮MENU screen❯ ❮SET MODE❯
(Push [MENU/ ]) (Rotate [DIAL]
w Rotate [DIAL]
†
to select the auto repeater setting.
[U.S.A. version]:
• "RPT1" : Activates duplex only. (default)
• "RPT2" : Activates duplex and tone.
• "OFF" : Auto repeater function is turned OFF.
[Korean version]:
• "ON" : Activates duplex and tone. (default)
• "OFF" : Auto repeater function is turned OFF.
e Push [ ](5)
to return to set mode, and push
(or [ ](4))
[MENU/ ] to return to frequency indication.
➪
❮AUTO RPT❯
† †
, then push [ ](5) .)