Please highlight the
please click the Save button to back to the previous menu.
4.10.4 Abnormality
There are two types: Disk/Network.
Disk: Disk error, no disk, no space. See Figure 4-83 and Figure 4-84.
Network: Disconnection, IP conflict, MAC conflict. See Figure 4-85.
Alarm output: Please select an alarm activation output port (multiple choices).
Less than: The system can alarm you when the HDD space is less than the threshold you set
here (For HDD no space option only).
Latch: Here you can set corresponding delay time. The value ranges from 1s-300s. The system
automatically delays for the specified seconds in turning off the alarm and activated output after
external the alarm is cancelled.
Show message: The system will pop up a message in the local screen to alert you when an alarm
occurs.
Alarm upload: The system will upload the alarm signal to the network (including the alarm center)
if you enabled this function. For a disconnection event, IP conflict event, and MAC conflict event,
this function is null.
Send email: The system will send out an email to alert you when an alarm occurs.
Buzzer: Highlight the icon to enable this function. The buzzer beeps when an alarm occurs.
Figure 4-82
icon to select the corresponding function. After completing the settings,
80