Table of Contents
Advertisement
4.5.1 Preview
If you want to change the system date and time, you can refer to general settings (Main
Menu->Setting->System->General). If you want to modify the channel name, please refer to the
display settings (Main Menu->Camera->Channel Name).
Please refer to the following sheet for detailed information.
1
2
Tips
Preview drag: If you want to change the position of channel 1 and channel 2 when you are
previewing, you can left mouse click in channel 1 and then drag it to channel 2. Release the
mouse and channel 1 and channel 2 switch positions.
Use the middle mouse button to control window split: You can scroll the middle mouse button to
switch the window split amount.
4.5.2 Preview control interface
Move the mouse to the top center of the video of the current channel, and the system pops up the
preview control interface. See Figure 4-19. If your mouse stays in this area for more than 6 seconds
and preforms no operation, the control bar automatically hides.
1)
Realtime playback
This is to playback the previous 5-60 minutes of video recorded on the current channel.
Please go to the Main Menu->Setting->System->General to set the real-time playback time.
The system may pop up a dialogue box if there is no such recording for the current channel.
2)
Digital zoom
This is to zoom in on a specified zone of the current channel. It supports the zoom in function on
multiple-channels.
Click the
button and the button is shown as
There are two ways for you to zoom in.
Drag the mouse to select a zone. You can view an interface show as Figure 4-20.
Recording status
Motion detection
2
1
Video loss
3
4
Camera lock
3
4
5
Figure 4-19
.
6
28
Advertisement
Table of Contents
