Default; Auto Maintain - Amcrest NVR11H Series User Manual

4.14.5 Default

You can restore factory default settings to fix some problems when the device is running slowly or a
configuration error has occurred.
From Main Menu->Setting->System->Default, you can go to the default interface. See Figure 4-131.
Click the Default icon and the system pops up a dialogue box. You can highlight
default settings.

All

Camera

Network

Event

Storage

System
Please highlight
After all the settings are complete please click the OK button to go back to the previous menu.
Warning!
After you use the default function, some your customized settings may be lost forever! Please think
twice before you begin the operation!

4.14.6 Auto Maintain

Here you can setup an auto-reboot time and auto-delete old files. You can set it to delete the files for the
to select the corresponding function.
Figure 4-130
Figure 4-131
to restore factory
118