Table of Contents
Advertisement
Figure 4-30
Preset Setup
In Figure 4-30, click the Preset button and use the eight direction arrows to adjust camera to the proper
position. The interface is shown as in Figure 4-31.
Click the box next to Preset and then input the preset number.
Click the Set button to save the current preset.
Figure 4-31
Tour Setup
In Figure 4-30, click the Tour button.
Input tour value and preset No. Click the Add preset button to add the current preset to the tour. See
Figure 4-32.
Tips
Repeat the above steps to add more presets to the tour. Click the Del preset button to remove it from the
tour. Please note some protocols do not support the delete preset function.
37
Advertisement
Table of Contents
