4.6.1.2 Call PTZ Function
Call Preset
In Figure 4-29, input the Preset value and then click
the call.
Call Pattern
In Figure 4-29, input the Pattern value and then click
stop the call.
Call Tour
In Figure 4-29, input the Tour value and then click
call.
Call Scan
In Figure 4-29, input the Scan value and then click
call.
Rotate
In Figure 4-29, click
The system supports preset, tour, pattern, scan, rotate, light, etc functions.
Note:
Preset, tour, and pattern all need the value to be the control parameters. You can define it as you
require.
You need to refer to your camera user's manual for the Aux definition. In some cases, it can be
used for special a process.
Figure 4-34
to enable the camera to rotate.
to call a preset. Click
to call a pattern. Click
to call a tour. Click
to call a scan. Click
again to stop
again to
again to the stop
again to stop the
39