Table of Contents
Advertisement
5.9.4.3 Record Control
The Record interface is shown as in Figure 5-77.
Please refer to the following sheet for detailed information.
Parameter
Channel
Status
Auto
Manual
Stop
Start all/
stop all
Figure 5-76
Figure 5-77
Function
Here you can view the channel number.
The number displayed here is the maximum number of channels your
device supports.
There are three statuses: auto, manual, and stop.
The system enables the auto record function as you set in record
schedule setup (general, motion detect, and alarm).
This has the highest priority.
Enables the corresponding channel to record no matter what period
is applied in the record setup.
Stops the current channel recording no matter what period is applied
in the record setup.
Check the corresponding All buttons to enable or disable all of the
channels recording.
169
Advertisement
Table of Contents
