Table of Contents
Advertisement
5.9.5.1 General
The general interface includes the general, date/time, and holiday setup.
5.9.5.1.1 General
The general interface is shown as in Figure 5-81.
Please refer to the following sheet for detailed information.
Parameter
Device ID
Device No.
Language
Video
Standard
HDD full
Pack
duration
5.9.5.1.2 Date and time
The date and time interface is shown as in Figure 5-82
Figure 5-81
Function
This is to set device name.
This is device channel number.
You can select the desired language from the dropdown list.
Please note the device needs to reboot to activate this
modification.
This is to set the display video standard such as PAL.
Here is where you to select the working mode when the hard disk is
full. There are two options: stop recording or rewrite. If the NVR is in
rewrite mode, the current working HDD is full, and the next HDD is
not empty, the oldest files will be overwritten. If the NVR is in stop
recording mode, the HDD is full, and the next HDD is not empty,
recording will stop.
Here is where you to specify the recording duration. The value
ranges from 1 to 120 minutes. Default value is 60 minutes.
171
Advertisement
Table of Contents
