Lan Mode - Amcrest NVR11H Series User Manual

Once the information is entered click "Start Live Preview" to begin viewing your live feeds.

5.4 LAN Mode

For the LAN mode, after you have logged in, you can see the main window. See Figure 5-12.
This main window can be divided into the following sections.

Section 1: There are six function buttons: Preview, Setup (chapter 5.9), Info (chapter 5.10), Playback
(chapter 5.11), Alarm (chapter 5.12), and Logout (chapter 5.13).

Section 2: These are monitor channels that have successfully connected to the NVR.
Please refer to Figure 5-8 for main stream and extra stream switch information.

Section 3: Start Talk button.
You can click this button to enable the talk feature. Click 【▼】 to select the bidirectional talk mode. There
are four options: DEFAULT, G711a, G711u, and PCM. See Figure 5-9.
After you enable the bidirectional talking, the Start talk button becomes the End Talk button and it
becomes yellow. Please note, if the audio input port from the device to the client-end is using the first
channel audio input port, during the bidirectional talk process, the system will not encode the audio data
from the 1-channel.

Section 4: Instant record button. Click it and the button becomes yellow and the system begins
manual recording. See Figure 5-10. Click it again and the system restores the previous record mode.
Figure 5-7
Figure 5-8
Figure 5-9
Figure 5-10
127