Backup Log - Amcrest NVR11H Series User Manual


Export: Please connect the peripheral device first and then go to the following interface. Click the
Export button and you can see there is a corresponding "Config_Time" folder. Double click this folder
and you can view some backup files.

Import: Here you can import the configuration files from the peripheral device to the NVR. You need
to select a folder first. A dialoge box will appear asking you to select a folder containing a
configuration file. If no configuration file is found in the folder, a dialoge box will appear indicating this.
After a successfully import, the system needs to reboot to activate the new settings.

Format: Click the Format button and the system pops up a dialogue box for you to confirm the format
operation. The system begins formatting after you click the OK button.
Note:

The system cannot open the backup interface if there is a backup operation currently running.

Every time the backup interface is opened, it will be at the root directory of the peripheral device.

If you go to the configuration backup interface before inserting the peripheral device, please click the
the Refresh button to see the newly added device.

4.9.3 Backup Log

a) From Main Menu->Info->Log, the interface is shown as below. See Figure 4-67.
Figure 4-66
67