Table of Contents
Advertisement
Pattern Setup
In Figure 4-30, click the Pattern button and input pattern number.
Click the Begin button to start the direction operation. Or you can go back to Figure 4-27 to operate
zoom/focus/iris/direction operation.
In Figure 4-30, click the End button.
Scan Setup
In Figure 4-30, click the Scan button.
Use the direction buttons to set the camera's left limit and then click the Left button. Use the direction
buttons to set the camera's right limit and then click the Right button. Now the scan setup process is
complete.
Figure 4-32
Figure 4-33
38
Advertisement
Table of Contents
