b)
Check the box here to select the channel(s) to manually record. You can see the
corresponding indicator light on the front panel is on.
Channel: This is to select the desired device channels.
Manual: This has the highest priority. Enable the corresponding channel to record no matter what
period is applied in the record setup. Now the system is recording.
Auto: The system enables the auto record function as you set in chapter 4.7.2 schedule interface
(General/Motion detect/Alarm)
Stop: Stop current channel recording/snapshot no matter what period is applied in the record setup.
All: Check the All box to select all channels.
c)
Click the OK button to complete manual record setup.
4.7.5.2 Manual Snapshot
Click the
button on the preview control bar and you can take 1-5 picture(s). From the Main
Menu->Setting->Camera->Encode->Snapshot, you can set the amount of snapshots to take. You can go
to chapter 4.8 to view the snapshots.
4.7.6 Holiday Record/Snapshot
This is for you to set the holiday record or snapshot plan. Please note the holiday record/snapshot setup
has a higher priority than the ordinary date record/snapshot setup.
4.7.6.1 Holiday Record
a)
From Main Menu->Setting->System->General, you can go to the following interface. See Figure
4-56.
Figure 4-55
55