P2P; Connection - Amcrest NVR11H Series User Manual

Hide thumbs Also See for NVR11H Series:
Table of Contents

Advertisement

For the IP address of IPv6 version, default gateway, preferred DNS and
alternate DNS, the input value should be 128-digit. It should not be left blank.
LAN load

5.9.2.2 P2P

The P2P interface is shown as in Figure 5-30.
This is used to easily add the NVR to our Amcrest app, Amcrest View. You can find the app on the App
Store or Play store on your mobile device. When adding a new device on the app, select the QR option
then scan the QR code, give it a name, and enter your login credentials to connect.

5.9.2.3 Connection

The connection interface is shown as in Figure 5-31.
Please refer to the following sheet for detailed information.
The system can process the downloaded data first if you enable
this function. The download speed is 1.5X or 2.0X the normal
speed.
Figure 5-30
Figure 5-31
142

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nvr11h-p series

Table of Contents