Table of Contents
Advertisement
Please refer to the following sheet for detailed information.
Parameter
Server Type
Host IP
Server Port
Domain Name
User
Password
Update period
Quick DDNS and Client-end Introduction
1) Background Introduction
The external IP is not static if you use ADSL to access the internet. The DDNS function allows you to
access the NVR via the registered domain name. In addition to the general DDNS, Quick DDNS works
with the device from the manufacturer so that it can be easily setup.
2) Function Introduction
The Quick DDNS client has the same function as other DDNS clients. It bonds the domain name and the
IP address. Right now, the current DDNS server is for our own devices only. You need to refresh the
bonding relationship of the domain and the IP regularly. There is no user name, password, or ID
registration on the server. At the same time, each device has a default domain name (generated by MAC
address) as an option. You can also use a customized valid domain name (has not registered.).
3) Operation
Before you use Quick DDNS, you need to enable this service and set the correct server address, port
value, and domain name.
Server address: www.quickddns.com
Port number: 80
Figure 5-33
Function
You can select a DDNS protocol from the dropdown list and then
enable DDNS function.
DDNS server IP address or domain.
DDNS server port.
Your self-defined domain name.
The user name to your DDNS service.
The password to your DDNS service.
The device sends out an alive signal to the server regularly.
You can set the interval value between the device and DDNS
server here.
144
Advertisement
Table of Contents
