save the current setup of channel 1 to all channels, you can click the first box "All". Click the OK button to
save the current copy setup. Click the OK button in the Encode interface and the copy function will finish.
Please note, if you select All in Figure 4-45, the recording setup of all channels are the same and the
Copy button becomes hidden.
Click the OK button to save current setup.
4.7.2.2 Schedule Snapshot
From Main Menu->Setting->Storage->Record or on the preview interface, right mouse click and then
select the record item, you can see Figure 4-46.
Select the snapshot channel and enable the snapshot function. Click the Save button.
Figure 4-45
Figure 4-46
47