Table of Contents
Advertisement
Parameter
Max connection
TCP port
UDP port
HTTP port
HTTPS
RTSP port
5.9.2.4 PPPoE
The PPPoE interface is shown as in Figure 5-32.
Input the PPPoE user name and password you get from the IPS (internet service provider) and enable
the PPPoE function. Please save current setup and then reboot the device to activate the setup.
The device connects to the internet via PPPoE after the reboot. You can get the IP address from the IP
address column.
Please note. You need to use the previous IP address on the LAN to login to the device. Please go
to the IP address item via the device's current device information. You can access the client-end
via this new address.
5.9.2.5 DDNS
The DDNS interface is shown as in Figure 5-33.
The DDNS can connect the various servers so that you can access the system via a web address. Please
go to the corresponding service website to apply a domain name and then access the system via the
domain. This will allow you continuous access to your system even if the external IP changes.
Please select DDNS from the dropdown list (Multiple choices). Before you use this function, please make
sure your device supports this function.
Function
This is the max Web connections for the same device. The
value ranges from 1 to 120. The default setting is 120.
The default value is 37777. You can input a different port
number if necessary.
The default value is 37778. You can input a different port
number if necessary.
The default value is 80. You can input a different port number if
necessary.
The default value is 443. You can input a different port number if
necessary.
The default value is 554.
Figure 5-32
143
Advertisement
Table of Contents
