Table of Contents
Advertisement
c)
Click the Save button to complete alarm setup interface.
d)
From Main Menu->Setting->Storage->Schedule, you can go to Figure 4-43.
e)
Select alarm channel, period, and the record type for the alarm. Please refer to chapter 4.7.2.
f)
Click the Copy button to copy the current setup to other channel(s).
g)
Click the OK button to save the alarm settings.
4.7.4.2 Alarm Snapshot
a)
Please refer to Step a) to step c) of chapter 4.7.3.2 to enable timing snapshots.
b)
From Main Menu->Setting->Storage->Schedule you can go to Figure 4-54 to enable the
snapshot function.
c)
From Main Menu->Setting->Event->Alarm, you can go to Figure 4-53 to set the alarm parameter
and enable the snapshot function.
d)
Click the Save button to save alarm snapshot setup.
Figure 4-53
53
Advertisement
Table of Contents
